Without a doubt the most popular skin care products are those which use Vitamin C, also known as L-ascorbic acid.

In this post I will write about Cellex C and Skinceuticals C E Ferulic, two popular anti aging skin care products that use Vitamin C as their main active ingredients.

I will also discuss the problems with using Vitamin C in anti ageing skin care products and some other the alternatives that are available in the form of Vitamin C derivatives.

In the next post I will be giving some examples on how we can make our own DIY Cellex C and DIY Skinceuticals C E Ferulic products.

Vitamin C and anti-aging skin care

Vitamin C is one of the most popular ingredients in anti aging skin care products. Vitamin C can benefit the skin in two ways. First it can increase collagen production, and second as an antioxidant it can reduce and prevent skin damage caused by free radicals.

Vitamin C is also one of the most studied active ingredients in anti aging skin care. These studies examined the various ways in which Vitamin C increases collagen synthesis, and the way in which vitamin C prevents free radical damage, as well as UVB damage.

For more details about these studies, please look at this list of abstracts.

Cellex C

Commercial skin care products with vitamin C started with Cellex C. Developed by Lorraine Meisner , who is a cell biologist at UW-Madison, Cellex-C was quite revolutionary. There is an interesting article about her here.

From a DIY skin care point of view Cellex C is not very practical.  The three main ingredients are: L-ascorbic acid, the mineral zinc and the amino acid tyrosin.

Tyrosin has poor solubility in water and alcohol, and requires the use of some very professional (and dangerous) solvents.

Also, L-ascorbic acid is unstable, and this is what the main problem is.

Unstable L-ascorbic Acid

It is well known that L ascorbic acid is unstable.  It reacts with water and air, and will easily oxidize. Oxidized Vitamin C is not good for the skin, instead of an antioxidant, it becomes a pro-oxidant. This means that it will increase the formation of free radicals, instead of doing what it is supped to do and decrease free radicals in the skin.

Vitamin C derivatives

Many efforts have been made to use Vitamin C in skin care products. Most of these efforts have involved developing Vitamin C derivatives. For example, products such as: Ascorbyl palmitate, Magnesium ascorbyl phosphate, and Ascorbyl Tetraisopalmitate (also known as Tetrahexyldecyl Ascorbate).

Magnesium ascorbyl phosphate and Ascorbyl Tetraisopalmitate / Tetrahexyldecyl Ascorbate, have shown to increase collagen production, and they are good stable alternatives to L-ascorbic acid. However, it would be nice if we could still use the real deal.

Stable L-ascorbic acid in skin care products

Two other solutions have been developed. One is the L-ascorbic acid in silicone. I blogged about this recently, and you can read all about it here.

The other solution was offered by Pinnel and others in their paper “Ferulic Acid Stabilizes a Solution of Vitamins C and E and Doubles its Photoprotection of Skin”.

L-ascorbic acid with Ferulic acid

The Pinnell paper proposes that:

“Ferulic acid is a potent ubiquitous plant antioxidant. Its incorporation into a topical solution of 15% L-ascorbic acid and 1% tocopherol improved chemical stability of the vitamins (C+E) and doubled photoprotection to solar-simulated irradiation of skin from 4-fold to approximately 8-fold as measured by both erythema and sunburn cell formation. Inhibition of apoptosis was associated with reduced induction of caspase-3 and caspase-7. This antioxidant formulation efficiently reduced thymine dimer formation. This combination of pure natural low molecular weight antioxidants provides meaningful synergistic protection against oxidative stress in skin and should be useful for protection against photoaging and skin cancer.”

This study (and the patent) led to the Skinceuticals C E + Ferulic product. The Skinceuticals skin care product is certainly very popular and many people swear by it.

However, is it really stable?

This sentence “Ferulic acid is a potent ubiquitous plant antioxidant. Its incorporation into a topical solution of 15% L-ascorbic acid and 1% tocopherol improved chemical stability of the vitamins (C+E)” would suggest it is.

However, some forum members have commented that their product is colored orange, and an orange product with L-ascorbic acid means that the asacorbic acid has oxidized.

Did the Pinnell study also look at for how long Ferulic acid can stabilize a solution of Vitamin C and Vitamin E?

I don’t know, and it really does not matter, because this product is something that we can DIY ourselves.

The advantage of making your own version of Skinceuticals C+E+Ferulic is that it can be made fresh every week, so it will never oxidize.

In my next post I will discuss various DIY recipes for the SkinCeuticals product.  In the meantime there are already some recipes available on our website:  ce ferulic 1 and ce ferulic 2

Active ingredients for DIY Skinceuticals CE + Ferulic

http://www.bulkactives.com/ascorbicacid.htm

http://www.bulkactives.com/ferulicacidnatural.htm

http://www.bulkactives.com/dpanthenol.htm

http://www.bulkactives.com/nah.htm

Recent posts on various DIY skin care forums have discussed the issue of the penetration of L-ascorbic acid suspended in a silicone base into the skin.

More precisely, a few posters have started promoting the idea that L-ascorbic acid cannot penetrate into the skin, because silicone forms a barrier on the skin.

I would like to address this issue in more detail.

Background: Stable L-ascorbic acid products for skin care

The DIY skin care community has long struggled with the formulation of a stable L-ascorbic acid skin care product. In fact, professional skin care companies and formulators have also struggled with the same problem.

Some attempts have been made by professionals to develop a stable vitamin C skin care product.  The best example of this is the Skinceuticals C+E+Ferulic product.  This is based on the 2006 study “Ferulic acid stabilizes a solution of vitamins C and E and doubles its photoprotection of skin” by Pinnel and others.

This study claimed that

“Ferulic acid is a potent ubiquitous plant antioxidant. Its incorporation into a topical solution of 15% L-ascorbic acid and 1% tocopherol improved chemical stability of the vitamins (C+E) and doubled photoprotection to solar-simulated irradiation of skin from 4-fold to approximately 8-fold as measured by both erythema and sunburn cell formation.” http://www.nature.com/jid/journal/v125/n4/full/5603565a.html

However, consumers have found that skinceuticals C E ferulic product is often orange tinted.  This color usually indicates that the L ascorbic acid has oxidized, thus making it pro-oxidant.  So, even though Ferulic acid may stabilize l ascorbic acid in the lab, in practicality there appear to be some serious issues that have not been addressed.

DIY skin care formulators are able to work around this.  By making a CE Ferulic product at home, it is possible to have a fresh supply every week, thus reducing (but not eliminating) the amount of vitamin C oxidization.

Solution: The Fitzpatrick study

Another study of interest is the 2002 “Double-blind, half-face study comparing topical vitamin C and vehicle for rejuvenation of photodamage” by Fitzpatrick.

Even though this study predates the CE+Ferulic study, it did not start getting discussed on the DIY skin care forums until quite recently.

Fitzpatrick’s method was as follows:

“Ten patients having facial photodamage were recruited for a double-blind pilot study of a newly formulated vitamin C complex having 10% ascorbic acid, a water soluble acid, and 7% tetrahexyldecyl ascorbate, a lipid soluble analog.

Both of these are combined in an anhydrous polysilicone gel base, which acts as a ‘dermal patch,’ releasing the water soluble acid slowly and the lipid soluble analog rapidly. The active vitamin C complex was applied to one side of the face and the inactive placebo base was applied to the opposite side of the face once a day.” http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=pubmed&cmd=Retrieve&dopt=AbstractPlus&list_uids=11896774&query_hl=7&itool=pubmed_ExternalLink

Now, this is where a very few posters start having some issues.  The base used is an anhydrous silicone gel, and the doubt seems to be in the fact that a very few posters believe that silicone forms a barrier and therefore hinders the absorption of active ingredients.

However, let’s look at the next part of Fitzpatrick’s study:

“Biopsies showed increased Grenz zone collagen, as well as increased staining for mRNA for type I collagen. This formulation of vitamin C results in clinically visible and statistically significant improvement in wrinkling when used topically for 12 weeks. This clinical improvement correlates with biopsy evidence of new collagen formation.”

Now, if silicone prevents the absorption of active ingredients, than there would not have been an increase collagen.

So, this should put to rest the claims that using silicone as a base prevents the absorption of active ingredients.

Flawed study

There is one troubling aspect about the Fitzpatrick study.  The study did not test the use of each key ingredient separately.

The two key ingredients in the anhydrous C product are L-ascorbic acid (which is water soluble), and Ascorbyl Tetraisopalmitate (also known as Tetrahexyldecyl Ascorbate ) which is oil soluble.

So, even though the study shows that the combination the two active ingredients in a silicone base led to an increase of collagen, we do not know if this was caused by the Tetrahexyldecyl Ascorbate, the Vitamin C, or the combination of the two.

This brings us back full circle to the original problem! We do not know which active is responsible for the increase in collagen. So it is possible to claim that the L-ascorbic acid is in fact not absorbed by the skin, and that the increase of collagen is cause by the Tetrahexyldecyl Ascorbate.

The blame for this confusion can be put purely with Fitzpatrick. It seems a simple matter to have tested the activity of both l-ascorbic and Tetrahexyldecyl Ascorbate in anhydrous silicone, separately. However, he chose not to do this.

So, we remain with his original statement.

“Both of these are combined in an anhydrous polysilicone gel base, which acts as a ‘dermal patch,’ releasing the water soluble acid slowly and the lipid soluble analog rapidly.”

To me the dermal patch idea makes sense, and I personally put more trust in this than the doubt caused by a very few (but very ‘vocal’) posters on skin care forums.

In the end the choice is yours.

I will continue to use the anhydrous C product as my number one weapon in anti aging skin care.  Why? Because no matter which active did the job, somehow this product has improved my skin and that is ultimately what I want.

http://www.bulkactives.com/siliconegel.htm

http://www.bulkactives.com/ascorbicacid.htm

http://www.bulkactives.com/ascorbyltetraisopalmitate.htm

I recently read a post on another forum, and was slightly annoyed that an email I wrote about one of my recipes was either not understood or quoted out of context, or maybe I was not clear enough in my answer.

So, let me explain.

Ferulic acid is soluble in an alcohol.

I know that some people claim they have dissolved it in water of glycerin, but I wonder if they confuse ‘well dispersed’ with ‘dissolved’. There is a big difference, but because Ferulic acid is such a very fine powder it may be hard to physically tell the difference.

Now, what alcohols are suitable for dissolving Ferulic acid?

In my recipe I suggest ethanol or Propylene Glycol. My recipe does not suggest denatured alcohol, and I also do not suggest that people buy this.

There is a difference between ethanol and denatured alcohol.

“Ethanol, is also called ethyl alcohol, pure alcohol, grain alcohol, or drinking alcohol.” http://en.wikipedia.org/wiki/Ethanol

“Denatured alcohol is ethanol that has additives to make it toxic, unpalatable, or otherwise undrinkable. In some cases it is also dyed.” http://en.wikipedia.org/wiki/Denatured_alcohol

My recipe clearly states to use ethanol. One customer wrote that she bought ethanol, and got a bottle of denatured alcohol. This is an issue between her and the supplier she used. I suggested that she contact her supplier to verify what it was she actually ordered and received.

It may be possible to buy NON-denatured  ethanol where you live. However, in some countries this product is not available. In the USA people could buy Everclear (if available in your state), or you can simply use a high alcohol content VODKA.

Regarding the use of alcohols in skin care products.

I am well aware that a particular ‘scientific’ supplier makes a big deal out of this.

On their product pages she clearly states the solubility of her powder IF it is water or oil soluble.

If it is not, then there is no solubility info displayed, but they then claim that “The powder will not dissolve immediately, but will release components slowly into the cream/lotion.”

I think that this is a ridiculous claim to make, but it most definitely does help sell all their powders.

So, rant over.

In short, if you want to use actives that are alcohol soluble then use NON-denatured alcohol (  ethanol), Everclear, or vodka. DO not use denatured alcohol.

If you don’t want to use any alcohol in your skin care products, then do not buy powders that only dissolve in alcohol.

If you want to try alternative solvents, like glycerin, please make sure that the powder has actually dissolved, not just well-dispersed.

Active ingredients for skin care formulations are only as effective as the delivery system. The more efficient the delivery system, the more likely it is that the active ingredient will perform as intended. Consider all of the benefits made possible by Arlasolve DMI delivery enhancer, a safe carrier ingredient proven to place active ingredients where they are needed most on skin. A water-white liquid with excellent solvent properties, Arlasolve DMI offers formulators the option to boost the penetration of actives in the epidermis layer of skin, enabling targeted delivery for products such as self-tanners, anti-acne treatments and more.

Consumers of skin care products will notice the difference in products formulated with a delivery enhancement agent. Test results show that Arlasolve DMI contributes to fast color development of sunless tanner, with less streaking and longer lasting tan as compared with self-tanner products without the carrier ingredient. In other specialty products, such as eye-zone treatments, skin serums, scalp treatments, Arlasolve DMI may be used to enhance skin penetration. The unique solvency properties of Arlasolve DMI boosts performance of formulations such as make-up removers.

The skin care formulators’ performance booster

Ask consumers why they use a skin care product and chances are good they will purchase one they perceive to be effective. Formulators can improve the odds that an active ingredient will work to the benefit of the consumer in products designed for skin treatment. With Arlasolve DMI, the formulator can enhance the delivery of active ingredients without having to add more active. Effective delivery of actives such as salicylic acid, Vitamin C, lactic acid, hydrocortisone and hyaluronic acid can even reduce the active ingredient concentration requirement, serving to reduce the formulation cost of finished products.

Other benefits of Arlasolve DMI include:

• Enhanced penetration of actives to the epidermis, enabling targeted delivery
• A lower level of skin irritation with a reduction in the required concentration level of aggressive actives
• Improved formulation shelf stability, including those susceptible to hydrolysis and transesterfication
• Miscibility with most organic solvents and non-ionic surfactants
• Incorporation within many product forms, including clear gels
• A long history of safe usage
• Ability to transport water soluble actives into skin, without recrystallization of the active
• Ability to produce formulations with standard equipment, without the need for flammable materials handling

Arlasolve DMI / Dimethyl Isosorbide

Preservatives are chemicals that kill bacteria, fungi and molds. They are commonly present in ANY product that contains water. For this reason, oil-based skin care products and anhydrous (water free) skin care products, do not need preservatives.

However, creams, lotions and any other product where water is present, require adding a preservative.

If you do NOT use a preservative, or if you decide to believe the hype and try out a ‘natural’ preservative (such as grapefruit seed extracts), then you are putting yourself, and your skin, at RISK.

The only way you can avoid using preservatives is if you make your products FRESH every week, and store them in the refrigerator. This is what we, at BulkActives, do.

We have now started carrying three preservative systems. None are formaldehyde releasing, but they do contain other chemicals that have been getting a bad name (phenoxyethanol and the paraben family).

Let me repeat, if you make your products FRESH every week, and store them in the refrigerator, then, and ONLY then, can you avoid using preservatives.

It is a well-known fact of life that exposure to UV light, especially the UVA component, festers skin disorders like melanoma and non-melanoma skin cancers. Superficial remedies such as sunscreens are effective only to a limited extent. This realization has led to investigation of new methods to protect the skin from photo-damaging effects of solar UV radiation, or “photo-carcinogenesis” as it is called. Recent years have seen considerable interest in identifying naturally-occurring botanicals with anti-oxidant and anti-inflammatory properties, and which exhibit anti-carcinogenic and anti-mutagenic functionality.

It is in this light that the medicinal benefits of milk thistle have been a subject of intense research by scientists. Though its value as a medicine for a host of health conditions, including dermatological, has been known for over 2,000 years, it is only now that science has seriously begun looking at the role played by milk thistle and “Silymarin”, its active compound, in treating skin damage.

In an experiment conducted at Palacky University in Czechoslovakia (1), researchers studied the impact of two components of Silybum marianum (technical name for milk thistle) as both a preventative as well as treatment intervention for skin damage against UVA exposure. Their findings were positive, in that it was discovered that these two components – collectively known as “flavonolignans” – perform a host of functions, such as increasing the viability of keratinocytes in irradiated cells, inhibiting the production of ROS, stopping further depletion of ATP and GSH taking place at intracellular level, and halting the peroxidation of membrane lipids. Further, the activation of caspases-3 process that UVA exposure initiates gets halted and reversed when the two components of Silybum marianum are applied. The overall picture that emerges, therefore, is that Silybum marianum is a good candidate to be considered for inhibiting UV damage.

An interesting experiment conducted on mice at the University of Alabama in Birmingham has been reported in the March-April 2008 issue of Photochem Photobiology journal (2). Two observations from this research are of special relevance to us here. One, it is the CD11b+ cells, which are the major source of oxidative stress in UV-irradiated skin, were inhibited by Silymarin. The flavonoid also suppresses the infiltration of leukocytes that UV exposure had induced. The second important observation is that Silymarin not only halts UV damage, it also acts as a preventive measure. Another researcher has gone one step ahead with the identification of yet another reversal that this chemical performs to UV action: it reduces the volume of H2O2-producing and cytokine interleukin-10 producing cells, both of whose generation is activated by UV (6).

Nearly the same conclusion has been arrived at by researchers working in the Department of Pharmaceutical Sciences at the University of Colorado (3). Their research has shown a positive effect of Silibinin on the repair of UVB-induced DNA damage. Another experiment conducted at the Department of Dermatology of the University of Alabama has observed the inhibition affect that the flavonoid has on tumor promoters such as 12-O-tetradecanoylphorbol-13-acetate, mezerein, benzoyal peroxide and okadaic acid (4).

Topical application of Silibinin prior to, or immediately after, UV irradiation has been found to inhibit thymine dimer positive cell generation that UV induces in the epidermis (5). This research has also shown that terminal sunburn cell formation that is again induced by UV is inhibited too, when Silibinin is applied.

A strong case for Silymarin being a very effective agent in inhibiting and reversing carcinogen and tumor-promoter-induced cancers is made by two independent researches. In both the experiments (7), (8), it has been reported that Silibinin inhibits cancer-causing cells (ERK1/2 activation) and promotes benign cells (JNK1/2, p38), making it an effective cancer-intervention agent for cancer.

A paper published in the journal “Cancer Research” details yet another in-depth investigation carried out on the efficacy of Silymarin as a possible intervention agent against Stage I and Stage II tumors (9). The paper reports that the milk thistle extract has been found to be especially useful in Stage I tumor suppression, and inhibits edema, hyperplasia, proliferation index and oxidant state which take place due to UV irradiation. This same result has been arrived by an independent group of researchers, who used a different chemical to induce skin edema in mice (10).

From the above researches being conducted around the world, it may safely be concluded that Silymarin is proving to be very effective in inhibiting UV-induced skin damage, and the day may not be far when milk thistle becomes one of the major ingredients in sunscreen lotions.

References

Svobodová A, Zdarilová A, Walterová D, and Vostálová J. Flavonolignans from Silybum marianum moderate UVA-induced oxidative damage to HaCaT keratinocytes. J Dermatol Sci. 2007 Dec;48(3):213-24. Epub 2007 Aug 3.

Katiyar SK, Meleth S, and Sharma SD. Silymarin, a flavonoid from milk thistle (Silybum marianum L.) inhibits UV-induced oxidative stress through targeting infiltrating CD11b+ cells in mouse skin. Photochem Photobiol. 2008 Mar-Apr;84(2):266-71. Epub 2007 Nov 28.

Singh RP, and Agarwal R. Mechanisms and preclinical efficacy of silibinin in preventing skin cancer. Eur J Cancer. 2005 Sep;41(13):1969-79.

Katiyar SK. Silymarin and skin cancer prevention: anti-inflammatory, antioxidant and immunomodulatory effects. Int J Oncol. 2005 Jan;26(1):169-76.

Dhanalakshmi S, Mallikarjuna GU, Singh RP, and Agarwal R. Silibinin prevents ultraviolet radiation-caused skin damages in SKH-1 hairless mice via a decrease in thymine dimer positive cells and an up-regulation of p53-p21/Cip1 in epidermis. Carcinogenesis. 2004 Aug;25(8):1459-65. Epub 2004 Mar 19.

Katiyar SK. Treatment of Silymarin, a plant flavonoid, prevents ultraviolet light-induced immune suppression and oxidative stress in mouse skin. Int J Oncol. 2002 Dec;21(6):1213-22.

Singh RP, Tyagi AK, Zhao J, and Agarwal R. Silymarin inhibits growth and causes regression of established skin tumors in SENCAR mice via modulation of mitogen-activated protein kinases and induction of apoptosis. Carcinogenesis. 2002 Mar;23(3):499-510.

Jifu Zhao, Moushumi Lahiri-Chatterjee, Yogesh Sharma and Rajesh Agarwal. Inhibitory effect of a flavonoid antioxidant Silymarin on benzoyl peroxide-induced tumor promotion, oxidative stress and inflammatory responses in SENCAR mouse skin. Carcinogenesis, Vol. 21, No. 4, 811-816, April 2000.

Lahiri-Chatterjee M, Katiyar SK, Mohan RR, and Agarwal R. A flavonoid antioxidant, Silymarin, affords exceptionally high protection against tumor promotion in the SENCAR mouse skin tumorigenesis model. Cancer Res. 1999 Feb 1;59(3):622-32.

Zhao J, Sharma Y, and Agarwal R. Significant inhibition by the flavonoid antioxidant Silymarin against 12-O-tetradecanoylphorbol 13-acetate-caused modulation of antioxidant and inflammatory enzymes, and cyclo-oxygenase-2 and interleukin-1-alpha expression in SENCAR mouse epidermis: implications in the prevention of Stage I tumor production. Mol Carcinog. 1999 Dec;26(4):321-33.

In the last two articles we have covered the types of UV damage, and looked at the current range of common ingredients. With that out of the way, it is time to cover botanical sun care.

The simple truth is that, with the issues surrounding some of the chemical UV protection ingredients, you may not always want to lather up. When it comes to those days that you will spend hours out in the sun, the benefits outweigh the risks, and you should protect yourself from the suns damage.

For the days that you won’t be in the sun for long periods of time, though, it is better to use botanical products. Many botanical ingredients provide anti-oxidant protection, have anti-inflammatory properties, and have been shown to be able to repair the suns effects.

The advantage to using botanical sun products is that you aren’t covering your body in harmful chemicals. For the times that you are using the chemical products, a good botanical antioxidant can also provide protection against the damaging effects of the sunscreen itself.

Botanical Sun Care Ingredients

Studies are currently being done into botanical ingredients that provide UV protection. Some of the ingredients that I have listed do provide mild UVB protection, but they aren’t adequate for long term exposure. What you really want when you start to make a sun care product, from botanicals, are ingredients that provide antioxidant protection, and ingredients that help to repair the suns damage.

With that let’s look at some botanical ingredients that work well for sun care. The idea that some ingredients are better than others does hold true here, and I have tried to indicate the best ingredients for the job.

Botanical Antioxidants and Sun Care Ingredients

Conclusion – Protect Yourself

With the last three article we have covered UV damage, and how to protect yourself. You should now have a good knowledge of ingredients that can be harmful, and those that work for you. With this last article you also have a good guide to ingredients to use in your botanical sun care products.  When it comes to sun protection and to DIY skin care, choosing the right ingredients for the job is important to ensuring your skin’s health!

This is BulkActives’ current list of active ingredients, cosmeceuticals, or skin actives for DIY and make your own, homemade skin care products:

Allantoin

Alpha Lipoic Acid (Thioctic acid, RS-ALA)

L-ascorbic Acid (Ascorbic Acid, L- , Vitamin C)

Ascorbyl Tetraisopalmitate (Tetrahexyldecyl Ascorbate)

Beta 1-3 Glucan YEAST (70%)

Beta 1-3,1-4 Glucan OAT(90%)

Beta Hydroxy acid (Salicylic Acid)

Bisabolol,Alpha (Natural)

Boswellia serrata

Centella Asiatica

CoEnzyme Q10 (CoQ10, Ubiquinone)

Dipotassium Glycyrrhizinate

DMAE Bitartrate

D-Panthenol USP (liquid)

Ellagic Acid

Ferulic Acid (Natural)

GABA

Gamma oryzanol

Ginkgo Biloba

Glucosamine (N-acetyl-D)

Glycyrrhizinic acid

Grape seed proanthocyanidins

Green Tea EGCG (90%) – white

Gynostemma

Hyaluronic Acid (NaH)

ultra low weight Hyaluronic Acid (ULMW NaH)

Idebenone

Jiaogulan

L-carnitine

L(+) Lactic acid

Magnesium Ascorbyl Phosphate (MAP)

Niacinamide

Pantothenic acid

Pine Bark Proanthocyanidins (95%)

Pomegranate Extract (Ellagic acid 40%)

Quercetin

Resveratrol (98%) – white

Saw Palmetto

Silymarin

Soy isoflavones

White Willow – bark extract

Wild Yam

A Look at Skin Care Ingredients and Terminology

If you’re new to the world of do-it-yourself skin care, then sometimes the terminology that is used can seem quite daunting. Words like cosmeceuticals, skin actives, and active ingredients may seem unfamiliar. Then of course there is learning about the skin care ingredients themselves and trying to learn how they fit and what their benefits can be to you.

Getting familiar with the world of cosmetics and skin care doesn’t have to be difficult. To help you get started we have put together this brief guide to common terms you’ll find. This isn’t a definitive list of terminology. Moreover it will give you a start in understanding articles and recipes that you find for DIY skin care.

Cosmeceuticals, Active Ingredients, and Skin Actives

First let’s take a look at three very common terms in the world of skin care. All three of these terms are sometimes used interchangeably, but each one does have a slightly different meaning.

Comeceuticals – The term cosmeceuticals refers to products that have both cosmetic and pharmaceutical benefits (it’s also a combination of those two words). As an example White Willow Bark extract is used for exfoliating (a cosmetic benefit). It also provides sebum control (a pharmaceutical benefit). The term may be applied to a single ingredient or a whole product, and it is often used in cosmetic advertising.

Active Ingredients – The active ingredients in any skin care recipe are those ingredients that actually serve a purpose related to skin care. Most recipes will include several ingredients to make a cream or scrub, and only one or two active ingredients.

Skin Actives – Here’s a term that you will find often in the world of cosmetics and skin care. The term “skin actives” is often used to refer to the active ingredients in many recipes. It is also included in the name of a number of cosmetic products, brands, and used in cosmetic advertising.

Other Important Terms Related to Skin Care Ingredients

There are also other terms you will find often when reading about skin care. If you browse any ingredient on our site, it shows that skin care ingredient’s properties in a list. Here are the quick definitions of some of the most common terms (as they apply to skin care ingredients).

Antioxidant - any substance capable of reducing oxidization and counteracting the damaging effects of oxidization on the skin.

Anti-inflammatory – any substance capable of reducing and/or preventing swelling in the skin

Skin elasticity – Refers to the ability of the skin to pull itself tight. As we age there is a fall in elasticity which often results in the formation of wrinkles.

Capillary health – any substance capable of promoting blood flow and cellular regeneration of the capillaries in the skin

Collagen production – substances that promote the production of collagen (provides strength and resilience to skin cells, thus reducing wrinkles and fine lines)

Emulsifiers – substances that promote the mixing of substances that wouldn’t normally mix together well

Exfoliating - substances that promote the removal of dead skin, thus revealing the healthier layer below.

Skin lightening – substances capable of reducing skin pigmentation

Skin brightening – substances that promotes proper pigmentation and reduces discoloration due to age spots, etc

Wrinkle Tightening – substances that help to increase skin elasticity and reduce wrinkles

Oil control (or sebum control) – Sebum is the oil responsible for blemishes that come with acne. Substances that control the production of oil can reduce acne.

With a brief look at some terminology it is very likely that you’re ready to start making your own skin care products. An easy way to get started is with our skin care recipe list. Each recipe links to the specific ingredients you will need, and provides instructions on how to make your next skin-care creation.

When it comes to skin care, the products you choose are important. Just because a product advertises that it is anti-aging, or anti-inflammatory, doesn’t mean that it will work. In fact, with most commercially made products, the chemicals they use in making them work to reverse the positive effects that they could have had.

That store bought product likely includes detergents, chemical fragrances, dyes, and other toxic substances.  Your skin absorbs whatever you put on it. Using store-bought skin creams, and cleansers, simply put – can be a bad idea.

Even worse, many skin care product manufacturers work on the idea of label value.  By putting a minimum amount of the active skin care ingredients in their product, they can list it on their label.  The consumer then ends up buying an overpriced beauty product that has absolutely no affect on the skin.

Luckily there is a better way!

By making your own skin care products, also known as DIY skin care, the consumer now has the ability to tailor make a good product at a fair price.

Many people hold onto the idea that the best health products are naturally made. The same is true with skin care; choosing to make your own products is healthier.  It also allows you more freedom in choosing the right ingredients for the job.

There are actually many reasons why homemade products are better than their commercially made alternatives. Firstly you get the freedom to choose what products you put on your skin, and you get to rest assured that you know what you’re using. Most commercial products use long or invented names for common ingredients, or ingredients are included at ‘label value’ (just enough so that they can be listed on the label, but not enough to actually do anything useful). There are also other reasons: it will save you money, and it’s very rewarding to know that the anti-aging cream that you made actually worked!

The main reason that most people choose this route though, is the versatility if gives them. With homemade skin care products you can use recipes that are specifically made to target a certain type of problem.

Anti-Aging DIY Skin Care

One reason people seek out information and recipes for skin care, is for anti-aging products. There are literally thousands of products out there that claim to be wrinkle tightening, or wrinkle relaxing. Very few of them actually work, and the ones that do will likely cost you hundreds of dollars for a small amount.

With homemade skin care, you can choose ingredients like DMA bitartrate, L-ascorbic acid, CoQ10, Idebenone, or Ascorbyl Tetraisopalmitate (among others). All which are clinically proven to reduce fine lines and wrinkles, or have other anti aging qualities. There are also many ingredients that are meant for UV damage protection, or UV damage repair, which can reduce the aging of the skin in the first place.

Anti-Inflammatory DIY Skin Care

The next reason to make your own skin care products is for anti-inflammatory treatments. Store bought products, of this type, often include steroids in their ingredients. Steroids can  have many other adverse effects.

Ginkgo Biloba, Green Tea EGCG, Grape Seed Proanthocyanidins are just a few of the ingredients that you can use to take a holistic approach to anti-inflammatory cream.

Home Made Antioxidants

The term antioxidant is all the rage in health circles lately. As we learn more about oxidization, free radicals, and their effects on our health antioxidants have become an important part of health in general.

When you choose to make your own skin care products you can choose from scientifically proven anti-oxidants such as silymarin, Pine bark Proanthocyanidins, or Pomegranate extract; all of which have many other benefits to your skin.

Anti-Acne DIY Skin Care

Another area where homemade skin care products are better is for acne prevention. Commercially made acne products include very harsh chemicals, such as Benzyl Peroxide, which is a proven carcinogenic substance.

When you choose to make your own skin care products acne you can use ingredients such as salicylic acid, or White Willow Bark. Both of which provide sebum control, and get to acne at its source!

Scar Care

The last area that I will discuss in this article is scar care. Commercially made products for this purpose often include chemicals that aren’t good for your skin at all.

With DIY skin care you can use ingredients like Centella asiatica. This particular substance has been clinically tested for stretch mark reduction, scar care, and has wound healing properties. There are also other natural products that have been tested for the same purpose (with very good results).

The truth of the matter is that along with all of the health benefits, making your own skin care products is rewarding, and it will save you a lot of money. When you’re ready to get started, take a look at our skin care recipes. There you’ll find all the instructions you need to get started with DIY skin care!