Without a doubt the most popular skin care products are those which use Vitamin C, also known as L-ascorbic acid.

In this post I will write about Cellex C and Skinceuticals C E Ferulic, two popular anti aging skin care products that use Vitamin C as their main active ingredients.

I will also discuss the problems with using Vitamin C in anti ageing skin care products and some other the alternatives that are available in the form of Vitamin C derivatives.

In the next post I will be giving some examples on how we can make our own DIY Cellex C and DIY Skinceuticals C E Ferulic products.

Vitamin C and anti-aging skin care

Vitamin C is one of the most popular ingredients in anti aging skin care products. Vitamin C can benefit the skin in two ways. First it can increase collagen production, and second as an antioxidant it can reduce and prevent skin damage caused by free radicals.

Vitamin C is also one of the most studied active ingredients in anti aging skin care. These studies examined the various ways in which Vitamin C increases collagen synthesis, and the way in which vitamin C prevents free radical damage, as well as UVB damage.

For more details about these studies, please look at this list of abstracts.

Cellex C

Commercial skin care products with vitamin C started with Cellex C. Developed by Lorraine Meisner , who is a cell biologist at UW-Madison, Cellex-C was quite revolutionary. There is an interesting article about her here.

From a DIY skin care point of view Cellex C is not very practical.  The three main ingredients are: L-ascorbic acid, the mineral zinc and the amino acid tyrosin.

Tyrosin has poor solubility in water and alcohol, and requires the use of some very professional (and dangerous) solvents.

Also, L-ascorbic acid is unstable, and this is what the main problem is.

Unstable L-ascorbic Acid

It is well known that L ascorbic acid is unstable.  It reacts with water and air, and will easily oxidize. Oxidized Vitamin C is not good for the skin, instead of an antioxidant, it becomes a pro-oxidant. This means that it will increase the formation of free radicals, instead of doing what it is supped to do and decrease free radicals in the skin.

Vitamin C derivatives

Many efforts have been made to use Vitamin C in skin care products. Most of these efforts have involved developing Vitamin C derivatives. For example, products such as: Ascorbyl palmitate, Magnesium ascorbyl phosphate, and Ascorbyl Tetraisopalmitate (also known as Tetrahexyldecyl Ascorbate).

Magnesium ascorbyl phosphate and Ascorbyl Tetraisopalmitate / Tetrahexyldecyl Ascorbate, have shown to increase collagen production, and they are good stable alternatives to L-ascorbic acid. However, it would be nice if we could still use the real deal.

Stable L-ascorbic acid in skin care products

Two other solutions have been developed. One is the L-ascorbic acid in silicone. I blogged about this recently, and you can read all about it here.

The other solution was offered by Pinnel and others in their paper “Ferulic Acid Stabilizes a Solution of Vitamins C and E and Doubles its Photoprotection of Skin”.

L-ascorbic acid with Ferulic acid

The Pinnell paper proposes that:

“Ferulic acid is a potent ubiquitous plant antioxidant. Its incorporation into a topical solution of 15% L-ascorbic acid and 1% tocopherol improved chemical stability of the vitamins (C+E) and doubled photoprotection to solar-simulated irradiation of skin from 4-fold to approximately 8-fold as measured by both erythema and sunburn cell formation. Inhibition of apoptosis was associated with reduced induction of caspase-3 and caspase-7. This antioxidant formulation efficiently reduced thymine dimer formation. This combination of pure natural low molecular weight antioxidants provides meaningful synergistic protection against oxidative stress in skin and should be useful for protection against photoaging and skin cancer.”

This study (and the patent) led to the Skinceuticals C E + Ferulic product. The Skinceuticals skin care product is certainly very popular and many people swear by it.

However, is it really stable?

This sentence “Ferulic acid is a potent ubiquitous plant antioxidant. Its incorporation into a topical solution of 15% L-ascorbic acid and 1% tocopherol improved chemical stability of the vitamins (C+E)” would suggest it is.

However, some forum members have commented that their product is colored orange, and an orange product with L-ascorbic acid means that the asacorbic acid has oxidized.

Did the Pinnell study also look at for how long Ferulic acid can stabilize a solution of Vitamin C and Vitamin E?

I don’t know, and it really does not matter, because this product is something that we can DIY ourselves.

The advantage of making your own version of Skinceuticals C+E+Ferulic is that it can be made fresh every week, so it will never oxidize.

In my next post I will discuss various DIY recipes for the SkinCeuticals product.  In the meantime there are already some recipes available on our website:  ce ferulic 1 and ce ferulic 2

Active ingredients for DIY Skinceuticals CE + Ferulic

http://www.bulkactives.com/ascorbicacid.htm

http://www.bulkactives.com/ferulicacidnatural.htm

http://www.bulkactives.com/dpanthenol.htm

http://www.bulkactives.com/nah.htm

There has been some confusion about the difference between Ascorbyl Tretaisopalmitate and Tetrahexyldecyl Ascorbate.

There is no difference!

Ascorbyl Tretaisopalmitate and Tetrahexyldecyl Ascorbate are the same product with a different name.

Tetrahexyldecyl Ascorbate is a colorless to pale yellow liquid.  Its CAS number is 183476-82-6 (CAS# 183476-82-6). Its INCI name is Tetrahexyldecyl Ascorbate (INCI: Tetrahexyldecyl Ascorbate) and its chemical name is Ascorbyl Tetraisopalmitate (Chem. Name: Ascorbyl Tetraisopalmitate).

What is Tetrahexyldecyl Ascorbate?

Tetrahexyldecyl Ascorbate is a very stable, oil-soluble Vitamin C ester which has anti-oxidant activity, inhibiting lipid peroxidation. Topical use can mitigate the damaging effects of UV exposure. Studies have shown it to stimulate collagen production as well as clarifying and brightening the skin by inhibiting melanogenesis (the production of pigment) thereby promoting a more even skin tone. Unlike ascorbic acid, it will not exfoliate or irritate skin.

How do I use Tetrahexyldecyl Ascorbate?

Tetrahexyldecyl Ascorbate is one of the easiest skin care actives to use in DIY skin care.  It can be added to any cream or lotion, and it is also the key ingredient in an Anhydrous C product.  I wrote a previous post about Anhydrous C  ( l-ascorbic acid and Tetrahexyldecyl Ascorbate in a silicone base) here: http://bulkactives.com/blog/index.php/2009/11/anhydrous-c-for-skin-care-absorption-of-l-ascorbic-in-a-silicone-base/

Dimethyl Isosorbide (DMI) is a high purity solvent and carrier which offers a safe, effective delivery enhancement mechanism for active ingredients in personal care products. Sunless tanners, facial and eye-zone treatments, skin serums, anti-acne formulations and make-up removers are just some of the products whose performance can be improved with the use of Dimethyl Isosorbide (DMI) in formulation. In addition to improving performance, its use as an epidermal penetration enhancer can allow formulators to reduce the amount of actives required to achieve effects, resulting in reduced formulation costs, and lower skin irritation with aggressive active ingredients.

Active ingredients for skin care formulations are only as effective as the delivery system. The more efficient the delivery system, the more likely it is that the active ingredient will perform as intended. Consider all of the benefits made possible by Dimethyl Isosorbide delivery enhancer, a safe carrier ingredient proven to place active ingredients where they are needed most on skin. A water-white liquid with excellent solvent properties,Dimethyl Isosorbide offers formulators the option to boost the penetration of actives in the epidermis layer of skin, enabling targeted delivery for products such as self-tanners, anti-acne treatments and more.

Consumers of skin care products will notice the difference in products formulated with a delivery enhancement agent. Test results show that Dimethyl Isosorbide contributes to fast color development of sunless tanner, with less streaking and longer lasting tan as compared with self-tanner products without the carrier ingredient. In other specialty products, such as eye-zone treatments, skin serums, scalp treatments, Dimethyl Isosorbide may be used to enhance skin penetration. The unique solvency properties of Dimethyl Isosorbide boosts performance of formulations such as make-up removers.

The skin care formulators’ performance booster

Ask consumers why they use a skin care product and chances are good they will purchase one they perceive to be effective. Formulators can improve the odds that an active ingredient will work to the benefit of the consumer in products designed for skin treatment. With Dimethyl Isosorbide, the formulator can enhance the delivery of active ingredients without having to add more active. Effective delivery of actives such as salicylic acid, Vitamin C, lactic acid, hydrocortisone and hyaluronic acid can even reduce the active ingredient concentration requirement, serving to reduce the formulation cost of finished products.

Other benefits of Dimethyl Isosorbide:

• Dimethyl Isosorbide offers enhanced penetration of actives to the epidermis, enabling targeted delivery.
• Dimethyl Isosorbide provides a lower level of skin irritation with a reduction in the required concentration level of aggressive actives.
• Dimethyl Isosorbide gives improved formulation shelf stability, including those susceptible to hydrolysis and transesterfication.
• Dimethyl Isosorbide has miscibility with most organic solvents and non-ionic surfactants.
• Dimethyl Isosorbide allows incorporation within many product forms, including clear gels.
• Dimethyl Isosorbide has a long history of safe usage.
• Dimethyl Isosorbide has the ability to transport water soluble actives into skin, without recrystallization of the active.
• Dimethyl Isosorbide has the ability to produce formulations with standard equipment, without the need for flammable materials handling.

Buy Arlasolve DMI / Dimethyl Isosorbide